Carbon teflon foil and sheet

Rp. 123
Last Updated
17 Nov 2021
Minimum Order
1 Call

Specification of Carbon teflon foil and sheet

Selling Carbon Teflon Foil (PTFE)

Carbon Teflon PTFE Sheet sheet and Rod length

filled with other materials such as bronze, glass and carbon graphite.

Each had its own advantages Graphite filled PTFE for chemical resistance and are compatible with most hydraulic fluids.

Outstanding performance when used for hydraulic pneumatic compression type piston rod and seal the band bearing and application of rotary. Coefficient of geSEK is low compared to other PTFE filled material.


Elastic modulus and surface higher than the hardness of PTFE modified. Bronze filled PTFE filler has a better outfit mulur resistance and thermal conductivity higher than fiber glass with PTFE

These compounds are easy to machine but has a bad chemical robustness in the presence of acid and alkali.

Useful in an application that is experiencing a high mechanical load or kecepatahigh n rub the contacts where the bronze charger supplies power and conductivity to carry the unwanted excess heat.


Carbon filled PTFE different filler percentages would change the nature of. Two basic ingredients used in this compound is in itself highly questionable.

PTFE has a good friction properties including low wear rate and good elasticity.

The brittle carbon fillers and possess low-wear.

Both failed on high load and speed increase.


When both elements are formulated and properly mixed together they become an excellent material for use as seals and rings in reciprocating compressor industry.

The nature of the increase of a few hundred times

. Wear resistance changed drastically compared to virgin PTFE.

The type and percentage of carbon is crucial to the performance of the material.

For optimum wear properties persentase charger is also important.


A lower percentage is easier to machine but did not perform well in service.

Glass filled PTFE glass fibre has an effect at least on electrical and chemical properties and adds greatly to the mechanical properties of filled PTFE.

In addition to the glass enhances the nature of press as much as 40 and increase resilience to wear very.

\Senyawa acid and oxidation refused but can be attacked by alkalis.

It is resistant to pana

Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :



Foto dari Pembeli

Ulasan dari Pembeli

Dengan Foto
Request a Quote
Produk Siap di Pesan
Rp 0
Logo IDT